Engineering “Magic Words” Explained: Functional Allocation, Functional Targets, and Front-Loading in Engine Power Development

Engineering Magic Words: Functional Allocation, Functional Targets, and Front-Loading. An Engine Power Development Example. Engineering Notes

Hi, this is Higashi.

In engineering development, we often hear terms such as “functional allocation,” “functional targets,” and “front-loading.”

These are all useful concepts. But seeing them in a report does not necessarily tell us what someone actually did.

We achieved the power target by revising the functional allocation, setting functional targets, and applying front-loading.

We can tell that development work took place. What remains unclear is where the problem was, what decisions were made, and what was changed.

I feel that terms like these can become “magic words”: words that make us feel we have explained something simply by using them.

In this article, I’d like to make these three terms more concrete through an example of engine power development. We will look at quantities that affect power, including cylinder filling, combustion phasing, and combustion duration.

Definitions and usage vary between companies and fields. The example below uses an imaginary gasoline engine. The numbers are illustrative, rather than specifications or experimental results from a particular product.

Sponsored Links

Making “increase engine power” more specific

Suppose we have the following development target:

Increase brake power from 95 kW to 100 kW at an engine speed of 6,000 rpm.

Brake power is the power actually available at the engine’s output shaft. At the same engine speed, increasing power requires more torque at that speed.

However, saying “let’s increase torque” does not give us enough information to design anything.

  • Is enough air entering the cylinders?
  • Can we supply the fuel needed for that amount of air?
  • Are we converting the energy released by combustion into work efficiently?
  • How much of that work is being consumed by friction and accessories?

We need to consider questions like these. Here, we will focus on air induction and combustion.

Sponsored Links

Looking at the quantities that affect power

Cylinder filling: how much air are we getting in?

Burning fuel requires air containing oxygen.

If more air enters the cylinders, there is scope to burn a corresponding amount of additional fuel while maintaining the same air-fuel ratio.

One way to describe how much air enters is through a cylinder-filling efficiency.

For filling and volumetric efficiency measures, we need to check the definition, including the reference air density and how the air quantity is evaluated. In this article, we use the following mass-based ratio:

Mass of fresh air inducted into the cylinder / Mass of air that would fill the swept volume at a specified reference state

In the rest of the article, we call this ratio filling efficiency. Comparisons require the same reference state and calculation method.

Getting more air in does not automatically deliver the desired power. Fuel delivery capacity, knock, temperature, and exhaust-system limitations also matter.

Combustion phasing: when does combustion take place?

Even with the same amount of fuel, the work we can extract changes with combustion timing. Pressure needs to develop at an appropriate point in the piston’s motion.

Here, we use MB50 to denote the timing at which the burned fraction reaches 50%, as an indicator of combustion phasing. Throughout this article, MB followed by a number denotes the timing corresponding to that burned fraction.

In combustion analysis, one method estimates the burned fraction from cumulative heat release calculated using cylinder pressure and other information. The calculation method and reference must also be consistent when comparing results.

MB50 describes “when,” so we express it as a crank angle relative to top dead center (TDC). For example:

MB50 moved from 14 degrees after TDC to 10 degrees after TDC.

This means that the representative combustion timing moved earlier.

MB50 is not the spark timing itself. It reflects what happens as combustion progresses after ignition. Here, the midpoint of combustion means the 50% burned timing; it is distinct from the mathematical centroid of the heat-release-rate curve.

Earlier combustion does not always mean more power. If combustion occurs too early, it can increase the work required during compression. Knock and cylinder-pressure limits also constrain what is possible.

What matters is achieving suitable combustion phasing for the operating condition.

Combustion duration: over how many crank-angle degrees does it burn?

Combustion takes time. In engines, we sometimes express its duration in crank-angle degrees.

In this article, MB10 is the timing at which the burned fraction reaches 10%, and MB90 is the timing at which it reaches 90%. We define combustion duration as the difference:

Combustion duration = MB90 − MB10

For example, a combustion duration of 28°CA means that the crankshaft rotates through 28 degrees between MB10 and MB90. The notation °CA means degrees of crank angle. MB50 is a timing, while MB90 − MB10 is a duration, so the duration does not need a positional reference such as “after TDC.”

Also, the actual time represented by 28°CA changes with engine speed. We need consistent operating conditions for a useful comparison.

When combustion takes longer, heat continues to be released as the piston moves down and the chamber volume increases. Shortening the duration while maintaining appropriate combustion phasing may improve the conversion of that heat into work.

However, shorter is not always better. Pressure rise, heat loss, and other effects must also be evaluated.

Sponsored Links

Functional allocation: what should we improve to achieve the power target?

Let’s return to the task of increasing power from 95 kW to 100 kW.

Possible approaches include improving air induction, adjusting combustion phasing, shortening combustion duration, and reducing losses such as friction.

We consider which functional improvements should contribute, and to what extent, so that the overall power target can be met.

In this article, we include this process in our discussion of functional allocation.

For example, suppose our investigation identifies the following reasons for the power shortfall:

The air quantity is insufficient. In addition, spark timing is being retarded to avoid knock, resulting in late combustion phasing.

In this situation, a plan that only increases the air quantity may be insufficient.

Alongside improving air induction, we could consider speeding up combustion or suppressing knock to bring combustion phasing closer to a suitable timing.

We then consider what roles the intake ports, valves, combustion chamber, ignition control, and other elements should play in achieving these functions.

The effects of these improvements cannot necessarily be added together independently.

For instance, changing an intake port to strengthen in-cylinder flow might increase flow resistance and reduce cylinder filling. Increasing the air quantity might also make knock constraints more severe.

We need to account for the relationships between functions and achieve the target through a workable combination.

Sponsored Links

Functional targets: turning an improvement strategy into measurable quantities

Suppose our strategy is to “induct more air and burn the mixture quickly at the right time.” That still does not tell us how to judge whether we have succeeded.

We therefore set targets for filling efficiency, combustion phasing, combustion duration, and other quantities. An initial proposal might look like this:

Quantity Current value Proposed target
Brake power 95 kW 100 kW
Filling efficiency 90% 93%
Combustion phasing: MB50 14° after TDC 10° after TDC
Combustion duration: MB90 − MB10 32°CA 28°CA

These are hypothetical values for an illustrative operating point at 6,000 rpm. They are not the result of a calculation or test showing that this combination produces 100 kW. They are candidates to be reviewed as we investigate their relationship to power and check feasibility.

The table alone also leaves some conditions undefined.

Along with engine speed, we need to specify intake-air temperature, coolant temperature, fuel, air-fuel ratio, and other conditions. Constraints such as knock, maximum cylinder pressure, and exhaust temperature must be checked as well.

For example, a specification cannot be accepted just because it achieves the combustion-phasing target if knock exceeds the allowable limit.

Setting functional targets involves more than choosing numbers. We need to explain how those targets relate to the power target and define them so that achievement can be assessed under stated conditions and constraints.

Sponsored Links

Front-loading: checking the combination before fixing the specifications

When should we check whether these functional targets are feasible?

Suppose we discover the following only after building a prototype engine:

The intake port was changed to speed up combustion, but the change reduced filling efficiency. Combustion duration became shorter, yet the power target was not met.

Changing the port geometry at this stage could require a design revision, another prototype, and repeat testing.

Instead, we investigate before fixing the specifications.

First, we use an engine-performance model or a similar tool to explore how changes in air quantity, combustion phasing, and combustion duration affect power.

We then compare candidate geometries using intake-flow analysis and flow testing to investigate whether they can balance cylinder filling with the desired in-cylinder flow. Combustion analysis and existing experimental results also help us estimate what combustion duration might be achievable.

However, stronger in-cylinder flow alone does not establish that the desired combustion duration will be achieved. We need to identify what the models can predict and where experimental confirmation is necessary.

In this way, problems that would previously have emerged after prototyping can be identified while the specifications are still easier to change, allowing us to make design decisions earlier. This is front-loading in our example.

We should be able to explain which decisions the work enabled us to make earlier, as well as saying that we started the calculations sooner.

Sponsored Links

Connecting the three terms in engine power development

Term What it means in this example
Functional allocation Decide how improvements in air induction and combustion should contribute to meeting the power target.
Functional targets Define the required levels of filling efficiency, MB50, MB90 − MB10, and other quantities, together with operating conditions and constraints.
Front-loading Evaluate whether the functional targets and the specifications needed to achieve them are feasible while specification changes are still easier to make.

In practice, setting the targets once does not finish the job. If early investigation shows that the proposed filling efficiency and combustion duration cannot both be achieved, we review the specifications or the combination of targets.

We move back and forth between these activities as we work toward a feasible design.

Sponsored Links

Explain the decisions behind the “magic words”

Let’s look again at the sentence from the beginning:

We achieved the power target by revising the functional allocation, setting functional targets, and applying front-loading.

For our example, we could describe the actual work as follows:

To address the power shortfall at 6,000 rpm, we investigated the effects of air quantity and combustion phasing, then proposed targets for filling efficiency, combustion phasing, and combustion duration. We evaluated both the shorter combustion duration and the lower filling efficiency caused by intake-port changes, and narrowed down the candidate geometries before fixing the specifications.

In a real report, we would add the analysis results and measurements. Did we achieve the target? How closely did the model match the experiment? What could we decide earlier than before? Answering those questions makes the outcome easier to understand.

Functional allocation, functional targets, and front-loading are useful terms for thinking about development. After using them, it helps to ask:

What did I investigate, what did I decide, and what did I change?

That question can reveal where an explanation is still missing.

I want to keep checking my own writing, too, so that technical terms do not become magic words.

I have also written about working with production development teams to get a new technology used after it has been developed:

Getting New Technology Used in Production Development: Lessons from Working in Both Roles

See you next time!

コメント