2026-11

Uncategorized

How Quickly Does a U-Bend Warm Up? Comparing Five Cases with Python CFD

Hi, Higashi here. In my last simulation, I heated the air entering a U-bend from 300 K to 350 K, then brought it back do...
Python

When Does the Outlet of a U-Bend Warm Up? Tracking a Heat Pulse with Python CFD

Follow a pulse of warm air through a U-bend in a Python CFD animation. As the inlet cycles from 300 to 350 K and back, see when the bend and outlet warm up.
Python

Does the Air in a U-Bend Stop When the Inlet Flow Stops? A Transient CFD Animation in Python

A Python CFD animation shows air still moving in a U-bend after the inlet flow stops. Compare air speed and pressure as the inlet speeds up and slows down.
Sponsored Links
Python

[Python] How Far Can an EV Go from Cape Sata on a Full Battery and One 15-Minute Charge?

Two hypothetical EVs leave Cape Sata fully charged and stop once for 15 minutes. A Python road map shows where their total ranges of 390 km and 1,080 km can take them.
Python

Why Did Total Pressure Seem to Rise Downstream? Area vs. Mass-Flow Averaging in CFD

A short duct expansion makes total pressure look as if it rises downstream. A Python CFD example shows why mass-flow weighting gives a different answer.
Python

How Much Inlet Pressure Does It Take to Quadruple the Flow Through a U-Bend?

I varied the inlet speed from 1 to 4 m/s in a Python CFD model of a square U-bend and compared static pressure, total pressure loss and air speed after the turn.
Python

What Changes When You Halve the Mesh Spacing? A U-Bend CFD Study in Python

I ran the same U-bend simulation on 1, 0.5 and 0.25 mm grids. See how mesh spacing changes the cell count, solver runtime and peak speed near the outer wall.
Python

Can You Build a CFD Solver in Python? Simulating Airflow Through a U-Bend

Follow air through two right-angle bends on a 0.5 mm grid. See the velocity field and the Python code that balances flow between neighboring cells.
AI

[Excel VBA] Build an AI Model in Excel: Train and Use a Neural Network

Train and use a neural network in Excel VBA without Python or add-ins. See the learning curve, test results, and an explained training-code excerpt.
Engineering Notes

Engineering “Magic Words” Explained: Functional Allocation, Functional Targets, and Front-Loading in Engine Power Development

Make engineering jargon concrete through engine power development: functional allocation, functional targets, front-loading, filling efficiency, MB50, and burn duration.
Engineering Notes

Getting New Technology Used in Production Development: Lessons from Working in Both Roles

Why do useful technologies go unused? An automotive engineer shares lessons from working in both technology development and production development.